First aid requirements at construction site (2024)

3 min read

7 years ago Khaled Ismail , Khaled Ismail

Employers are responsible for first aid in the workplace. To determine the first aid needs of your workplace, first you’ll need to do an assessment. Then, you can review the findings and take necessary steps to put proper first aid procedures in place. If you’re an employer, you are responsible for first aid in the workplace.

First aid requirements at construction site (1)

First aid requirements at construction site

First aid in the workplace is about providing workers with prompt, easily accessible, and appropriate first aid treatment. Depending on your workplace, some or all of the following might be needed:

  • Occupational first aid attendants with the CPR and First Aid training appropriate for the type of workplace, number of workers, and time to a hospital.
  • Proper facilities, such as first aid rooms or dressing stations.
  • First aid kits with appropriate types and quantities of supplies.
  • A record-keeping system so incidents can be logged.
  • Appropriate means of transporting injured workers to medical aid.
  • Effective means of communication between first aid attendants and workers served, and for the first aid attendant to call for assistance.

Conducting a first-aid assessment

To determine an adequate and appropriate level of first aid coverage, the first step is a first aid assessment. This doesn’t need to be complicated. But it does call for a full review of your workplace. The assessment will help you determine the minimum level of first aid needed in your workplace. First aid levels are outlined in the OHS Regulation Schedule 3-A: Minimum Levels of First Aid.

Steps to first aid assessment

1-Identify the number of workplaces

First aid coverage should be based on the total workforce present at each workplace. If your assessment determines you have multiple workplaces, you must complete an assessment for each location.

2-Identify your workplace hazard rating

First aid coverage is also determined by your workplace hazard rating. This rating reflects the nature and extent of the risks and hazards in your workplace. you canuse three levels of hazard ratings: low, moderate, and high. To assess your workplace’s hazard rating, see the Assigned Hazard Rating List.

3- Consider the surface travel time to a hospital

The level of first aid service required changes if it would normally take more than 20 minutes to safely transport an injured worker to hospital by road or water.

4- Determine the number of workers on a shift

Different shifts may have different requirements. Be sure to account for all workers who may require first aid during a shift.

5- Determine the required first aid services for your workplace

By referring to the OHS Regulation and supporting Guidelines and consulting appropriate WorkSafeBC resources (see Forms and Resources below), you can best determine what first aid kits, facilities, emergency vehicles, and equipment you need.

6- Review your assessment

Review steps 1 through 5 within one year of completing your assessment, or when there is a significant change in operations.

Developing first aid procedures

You are responsible for keeping up-to-date written first aid procedures at your workplace. As an employer, it’s also your responsibility to ensure all workers know where first aid is located and how to call for it. To help you develop and keep your workplace first aid procedures current, consider:

  • Drills — Conduct a drill at least once a year. This drill should test your workers’ awareness of how to call for first aid, how well the communication system works, and the ability of first aid attendants to respond. It will also help you determine if your first aid services are adequate to deal with injuries and illnesses most likely to happen in your workplace.
  • Maintaining the system — Consider assigning a worker to manage the first aid services at your workplace. His or her duties should include ensuring that required first aid attendant(s), supplies, facilities, and equipment are always available.

Also Read: First Aid For Burns

Tags: Assessment Construction Developing first Aid Kite site

More Stories

22 min read

  • Health

Implementing an Effective Medical Surveillance Program for Workers: Guidelines and Best Practices

23 hours ago Khaled Ismail , Khaled Ismail

3 min read

  • Guest Blogs
  • Health

Pro Ways To Keep Your Water Storage Tank Clean and Well-maintained

2 days ago Khaled Ismail , Khaled Ismail

4 min read

  • Guest Blogs
  • Health

The Warning Signs of Tooth Decay Caused by Suboxone

1 week ago Khaled Ismail , Khaled Ismail

Leave a Reply

You must be logged in to post a comment.

First aid requirements at construction site (2024)

References

Top Articles
Latest Posts
Article information

Author: Kerri Lueilwitz

Last Updated:

Views: 5777

Rating: 4.7 / 5 (67 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Kerri Lueilwitz

Birthday: 1992-10-31

Address: Suite 878 3699 Chantelle Roads, Colebury, NC 68599

Phone: +6111989609516

Job: Chief Farming Manager

Hobby: Mycology, Stone skipping, Dowsing, Whittling, Taxidermy, Sand art, Roller skating

Introduction: My name is Kerri Lueilwitz, I am a courageous, gentle, quaint, thankful, outstanding, brave, vast person who loves writing and wants to share my knowledge and understanding with you.